Skip to main content
 首页 » 编程设计

python之如何在 matplotlib 中将 y 轴设置为千位

2025年02月15日8luoye11

我有以下代码使用 Jupyter 在 Pytho 中创建一组 2 x 2 图。问题是第四个图(右下)的左 y 标签与第三个图的右 y 标签冲突。我试图将第四个图的左侧 y 标签的比例更改为数千,因此不会显示 -1000、0、1000 等,它只会显示 1、0、1,从而为标题提供足够的空间。我该怎么做?

按照我的代码:

    #Testing 2 x 2 plots for FO reporting 
 
plt.figure(figsize=(15,9)) 
 
#First Plot 
 
ax1=plt.subplot(2,2,1) 
plt.title("Downhole Pressure") 
ax1.plot(Time, Downhole_pressure, 'b', markersize=2, label="Downhole pressure") 
plt.xlabel("Injection time", fontsize=10) 
plt.xlim(0,80) 
plt.ylabel("Pressure, (psi)", fontsize=10) 
plt.ylim(6500,7500) 
plt.legend(bbox_to_anchor=(.999,.89), prop={'size': 10}) 
 
ax2=ax1.twinx() 
ax2.plot(Time, Slurry_rate,'m', markersize=2, label="Slurry") 
ax2.plot(Time, Proppant_rate, 'g', markersize=2, label="Proppant") 
plt.ylabel("Injection rate, (BPM))", fontsize=10) 
plt.ylim(0,100) 
 
plt.legend(bbox_to_anchor=(.879,.825), prop={'size': 10}) 
 
#Second Plot 
 
ax1=plt.subplot(2,2,2) 
plt.title("Fracture Width") 
ax1.plot(Time, Max_Frac_Witdth, 'b', markersize=2, label="Max") 
ax1.plot(Time, Mean_Frac_Width, 'r', markersize=2, label="Mean") 
plt.xlabel("Injection time", fontsize=10) 
plt.xlim(0,80) 
plt.ylabel("Fracture width, (mm)", fontsize=10) 
plt.ylim(0,10) 
plt.legend(bbox_to_anchor=(.84,.89), prop={'size': 10}) 
 
ax2=ax1.twinx() 
ax2.plot(Time, Slurry_rate,'m', markersize=2, label="Slurry") 
ax2.plot(Time, Proppant_rate, 'g', markersize=2, label="Proppant") 
plt.ylabel("Injection rate, (BPM))", fontsize=10) 
plt.ylim(0,100) 
plt.legend(bbox_to_anchor=(.879,.775), prop={'size': 10}) 
 
#Third Plot 
 
ax1=plt.subplot(2,2,3) 
plt.title("Fracture Height") 
ax1.plot(Time, Max_Frac_Ver_Pos, 'b', markersize=2, label="Max") 
ax1.plot(Time, Min_Frac_Ver_Pos, 'r', markersize=2, label="Min") 
ax1.plot(Time, Frac_Ver_Height, 'darkblue', markersize=2, label="Fracture Vertical Height") 
plt.xlabel("Injection time", fontsize=10) 
plt.xlim(0,80) 
plt.ylabel("Fracture Vertical Position (ft)", fontsize=10) 
plt.ylim(-200,400) 
plt.legend(bbox_to_anchor=(.99,.6), prop={'size': 10}) 
 
ax2=ax1.twinx() 
ax2.plot(Time, Slurry_rate,'m', markersize=2, label="Slurry") 
ax2.plot(Time, Proppant_rate, 'g', markersize=2, label="Proppant") 
plt.ylabel("Injection rate, (BPM))", fontsize=10) 
plt.ylim(0,100) 
plt.legend(bbox_to_anchor=(.82,.775), prop={'size': 10}) 
 
#Fourth Plot 
 
ax1=plt.subplot(2,2,4) 
plt.title("Fracture Length") 
ax1.plot(Time, Max_Frac_Trans_Pos, 'b', markersize=2, label="Max") 
ax1.plot(Time, Min_Frac_Trans_Pos, 'r', markersize=2, label="Min") 
ax1.plot(Time, Frac_Trans_Length, 'darkblue', markersize=2, label="Fracture Transversal Length") 
plt.xlabel("Injection time", fontsize=10) 
plt.xlim(0,80) 
plt.ylabel("Fracture Transversal Position (ft)", fontsize=10) 
 
plt.ticklabel_format(style='sci', axis='x', scilimits=(-2e3,3e3)) #tried, didn't work 
#plt.ylim(-2e3,3e3) #tried, didn't work 
 
plt.legend(bbox_to_anchor=(.99,.6), prop={'size': 10}) 
 
ax2=ax1.twinx() 
ax2.plot(Time, Slurry_rate,'m', markersize=2, label="Slurry") 
ax2.plot(Time, Proppant_rate, 'g', markersize=2, label="Proppant") 
plt.ylabel("Injection rate, (BPM))", fontsize=10) 
plt.ylim(0,100) 
plt.legend(bbox_to_anchor=(.82,.775), prop={'size': 10}) 
 
plt.savefig('side-by-side_09.png', dpi=300) 
#plt.show() 
plt.gcf().clear() 
plt.close('all') 

在此先感谢您的帮助!

请您参考如下方法:

为了给标题留出足够的空间,你可以添加一行

plt.tight_layout() 

保存图之前。它将优化轴的位置。

要更改轴的偏移量,使 yticks 显示 1、-1,请使用

plt.ticklabel_format(useOffset=1000)