Skip to main content
 首页 » 编程设计

python之逐行编辑G代码

2025年04月02日13落叶

我想逐行读取一个 g 代码文件,并根据末尾的注释对其执行操作。 g 代码来自 Slic3r。一些没有特定顺序的示例行如下所示:

G1 Z0.242 F7800.000 ; move to next layer (0) 
G1 E-2.00000 F2400.00000 ; retract 
G1 X0.000 Y30.140 F7800.000 ; move to first skirt point 
G1 E0.00000 F2400.00000 ; unretract 
G1 X-53.493 Y30.140 E2.14998 F1800.000 ; skirt 
G1 X57.279 Y-37.776 E22.65617 ; perimeter 
G1 X-52.771 Y-38.586 E56.83128 ; infill 

注释总是以分号开头,并使用一致的术语,例如周长或填充。理想情况下,脚本会读取该行,搜索特定的评论案例,基于此执行操作,然后更新文件,然后转到下一行。我对 python 有点陌生,所以我知道这将通过带有嵌套 if 语句的 for 循环来完成,但是我不确定如何设置基于这些关键术语的体系结构。

请您参考如下方法:

我不确定你到底想修改什么,所以我选择在表示撤回的注释前添加单词'(up)',和'(down) ' 在表示未撤回的注释前。

file_name = "file.gcode"  # put your filename here 
 
with open(file_name, 'r+') as f: 
 
    new_code = ""            # where the new modified code will be put 
    content = f.readlines()  # gcode as a list where each element is a line  
 
    for line in content:  
        gcode, comment = line.strip('\n').split(";")  # seperates the gcode from the comments  
        if 'unretract' in comment:   
            comment = ' (down) ' + comment 
        elif 'retract' in comment: 
            comment = ' (up)' + comment 
 
        new_code += gcode + ';' + comment + '\n'  # rebuild the code from the modified pieces 
 
    f.seek(0)           # set the cursor to the beginning of the file 
    f.write(new_code)   # write the new code over the old one 

文件内容现在是:

G1 Z0.242 F7800.000 ; move to next layer (0) 
G1 E-2.00000 F2400.00000 ; (up) retract 
G1 X0.000 Y30.140 F7800.000 ; move to first skirt point 
G1 E0.00000 F2400.00000 ; (down) unretract 
G1 X-53.493 Y30.140 E2.14998 F1800.000 ; skirt 
G1 X57.279 Y-37.776 E22.65617 ; perimeter 
G1 X-52.771 Y-38.586 E56.83128 ; infill 

如果您想改为修改 gcode,假设注释表示撤回,则用 'U' 替换第一个字母,如果注释表示撤回,则用 'D' 替换表示不撤回,你只需要替换这个:

if 'unretract' in comment:   
    comment = ' (down) ' + comment 
elif 'retract' in comment: 
    comment = ' (up)' + comment 

由此:

if 'unretract' in comment:   
    gcode = 'D' + gcode[1:] 
elif 'retract' in comment: 
    gcode = 'U' + gcode[1:] 

新文件内容:

G1 Z0.242 F7800.000 ; move to next layer (0) 
U1 E-2.00000 F2400.00000 ; retract 
G1 X0.000 Y30.140 F7800.000 ; move to first skirt point 
D1 E0.00000 F2400.00000 ; unretract 
G1 X-53.493 Y30.140 E2.14998 F1800.000 ; skirt 
G1 X57.279 Y-37.776 E22.65617 ; perimeter 
G1 X-52.771 Y-38.586 E56.83128 ; infill 

希望对您有所帮助!


编辑

为了响应您获取 X、Y 和 F 值的请求,这里是用于存储这些值的更新脚本:

file_name = "file.gcode"  # put your filename here 
 
    with open(file_name, 'r+') as f: 
 
        coordinates = [] 
        content = f.readlines()  # gcode as a list where each element is a line  
 
        for line in content:  
            gcode, comment = line.strip('\n').split(";")   
            coordinate_set = {} 
            if 'retract' not in comment and 'layer' not in comment: 
                for num in gcode.split()[1:]: 
                    coordinate_set[num[:1]] = float(num[1:]) 
                coordinates.append(coordinate_set) 

如果你print(coordinates)你会得到:

[{'X': 0.0, 'F': 7800.0, 'Y': 30.14}, {'E': 2.14998, 'X': -53.493, 'F': 1800.0, 'Y': 30.14}, {'E': 22.65617, 'X': 57.279, 'Y': -37.776}, {'E': 56.83128, 'X': -52.771, 'Y': -38.586}] 

编辑 2

脚本 1:

file_name = "file.gcode" 
 
with open(file_name, 'r+') as f: 
 
    new_code = ""             
    content = f.readlines()  
 
    for line in content:  
        if ';' in line: 
            try: 
                gcode, comment = line.strip('\n').split(";") 
            except: 
                print('ERROR\n', line) 
        else:  # when there are no comments 
            gcode = line.strip('\n') 
            comment = "" 
 
        if 'unretract' in comment:   
            comment = ' (down) ' + comment 
        elif 'retract' in comment: 
            comment = ' (up)' + comment 
 
        if comment != "": 
            new_code += gcode + ';' + comment + '\n'  
        else:  # when there are no comments 
            new_code += gcode + '\n' 
 
    f.seek(0)            
    f.write(new_code)  

脚本 2:

file_name = "file.gcode"  
 
with open(file_name, 'r+') as f: 
 
    coordinates = [] 
    content = f.readlines()  
 
    for line in content: 
        if ';' in line: 
            try: 
                gcode, comment = line.strip('\n').split(";") 
            except: 
                print(' ERROR \n', line, '\n') 
        else: 
            gcode = line.strip('\n') 
            comment = "" 
 
        coordinate_set = {} 
        if 'retract' not in comment and 'layer' not in comment and gcode: 
            for num in gcode.split()[1:]: 
                coordinate_set[num[:1]] = float(num[1:]) 
            coordinates.append(coordinate_set) 

Slic3r 执行一些奇怪文本的某些行不起作用,这就是 ERROR 打印的内容。另外,我建议您不要尝试 print 所有坐标,因为这会使 Python 崩溃。如果您想查看坐标的整体,可以将它们粘贴到单独的 .txt 文件中,如下所示:

with ('coordinates.txt', 'w') as f2: 
    f2.write(coordinates) 

编辑 3

更新脚本以处理括号中的注释。

脚本 1:

file_name = "file.gcode" 
 
with open(file_name, 'r+') as f: 
 
    new_code = "" 
    content = f.readlines() 
 
    for line in content: 
        if ';' in line: 
            try: 
                gcode, comment = line.strip('\n').split(";") 
            except: 
                print('ERROR\n', line) 
        else:  # when there are no comments 
            gcode = line.strip('\n') 
            comment = "" 
 
        if 'unretract' in comment: 
            comment = ' (down) ' + comment 
        elif 'retract' in comment: 
            comment = ' (up)' + comment 
 
        if comment != "": 
            new_code += gcode + ';' + comment + '\n' 
        else:  # when there are no comments 
            new_code += gcode + '\n' 
 
    f.seek(0) 
    f.write(new_code) 

脚本 2:

file_name = "3Samples_0skin_3per.gcode"  # put your filename here 
 
with open(file_name, 'r+') as f: 
 
    coordinates = [] 
    content = f.readlines() 
 
    for line in content: 
        if ';' in line: 
            try: 
                gcode, comment = line.strip('\n').split(";") 
            except: 
                print(' ERROR 1: \n', line, '\n')  
        elif '(' in line: 
            try: 
                gcode, comment = line.strip('\n').strip(')').split("(") 
            except: 
                print('ERROR 2: \n', line, '\n') 
        else: 
            gcode = line.strip('\n') 
            comment = "" 
 
        coordinate_set = {} 
        if 'retract' not in comment and 'layer' not in comment and gcode: 
            for num in gcode.split()[1:]: 
                if len(num) > 1: 
                    try: 
                        coordinate_set[num[:1]] = float(num[1:]) 
                    except: 
                        print('ERROR 3: \n', gcode, '\n') 
            coordinates.append(coordinate_set)