我正在尝试对三体问题建模,其中我有三个广义坐标(一个径向坐标和两个角坐标)和三个二阶(耦合)微分方程。我想看看系统在改变初始条件 rho[0] 时如何演化。 我的脚本有什么问题吗?上面已经很好地定义了变量和参数,因此我将省略它们;这是代码:
for i in range(1000000,10000000,1000000):
rho[0] = i
rho[1] = rho[0] + vrho*dt
theta[1] = theta[0] + vtheta*dt #angulos radianes
phi[1] = phi[0] + vphi*dt
for t in range(1, N-1):
#Velocidades de las coordenadas
v[0,t-1] = (rho[t] - rho[t-1])/dt
v[1,t-1] = (theta[t] - theta[t-1])/dt
v[2,t-1] = (phi[t] - phi[t-1])/dt
#"Ecuaciones diferenciales"
rho[t+1] = (2*rho[t] - rho[t-1]) + (rho[t]*(v[2,t-1]**2) - G*M/(rho[t]**2) - (9*G*M*((np.cos(theta[t]-phi[t]))**2)*(l**2))/(8*(rho[t]**4)))*(dt**2)
theta[t+1] = (2*theta[t] - theta[t-1]) + ((-3*G*M*np.sin(2*(theta[t]-phi[t])))/(2*(rho[t]**3)))*(dt**2)
phi[t+1] = (2*phi[t] - phi[t-1]) + ((3*G*M*np.sin(2*(theta[t]-phi[t]))*(l**2))/(8*(rho[t]**5)) - (2*v[0,t-1]*v[2,t-1])/(rho[t]))*(dt**2)
for j in range(0,N):
x[j] = rho[j]*np.cos(phi[j])
y[j] = rho[j]*np.sin(phi[j])
plt.plot(x,y)
这是错误:
---------------------------------------------------------------------------
MemoryError Traceback (most recent call last)
<ipython-input-3-4c789e1dfc65> in <module>()
21 y[j] = rho[j]*np.sin(phi[j])
22
---> 23 plt.plot(x,y)
我试图做的是让 python 求解不同初始条件下的 ODE,保存 rho、theta、phi 和 V 向量以便操纵它们。考虑到我想要 body 的轨迹,对于 rho 和 phi 的那些值,我想将它们转换为笛卡尔坐标,绘制轨迹,然后使用 rho 的下一个初始条件重新启动 ODE。
我不得不引入 j 计数器,因为 x 和 y 被定义为 np.zeros(N) 以匹配 rho、theta 和 phi 的维度。计数器代表这种向量的位置,其思想是对于 rho 和 phi 中的每个位置,笛卡尔等价物保存在相同的位置。由于 t 上升到 N-1,因此最后可用的 t 是 N-2,我不知道如何避免添加另一个;为了解决起点差,我可以写最后一个'for' switching j for t-1,但这不会导致维度错误吗?
请您参考如下方法:
你能试试下面的代码吗:
for i in range(1000000,10000000,1000000):
rho[0] = i
rho[1] = rho[0] + vrho*dt
theta[1] = theta[0] + vtheta*dt #angulos radianes
phi[1] = phi[0] + vphi*dt
for t in range(1, N-1):
# Velocidades de las coordenadas
v[0,t-1] = (rho[t] - rho[t-1])/dt
v[1,t-1] = (theta[t] - theta[t-1])/dt
v[2,t-1] = (phi[t] - phi[t-1])/dt
# "Ecuaciones diferenciales"
rho[t+1] = (2*rho[t] - rho[t-1]) + (rho[t]*(v[2,t-1]**2) - G*M/(rho[t]**2) - (9*G*M*((np.cos(theta[t]-phi[t]))**2)*(l**2))/(8*(rho[t]**4)))*(dt**2)
theta[t+1] = (2*theta[t] - theta[t-1]) + ((-3*G*M*np.sin(2*(theta[t]-phi[t])))/(2*(rho[t]**3)))*(dt**2)
phi[t+1] = (2*phi[t] - phi[t-1]) + ((3*G*M*np.sin(2*(theta[t]-phi[t]))*(l**2))/(8*(rho[t]**5)) - (2*v[0,t-1]*v[2,t-1])/(rho[t]))*(dt**2)
for j in range(0,N):
x[j] = rho[j]*np.cos(phi[j])
y[j] = rho[j]*np.sin(phi[j])
plt.plot(x,y)
我认为在绘图阶段有一些错误的缩进,这意味着每次你想要绘制一条线时,你实际上是在绘制 N ^ 2 行!
