Skip to main content
 首页 » 编程设计

python之matplotlib pyplot 2 在同一图中使用不同轴绘制

2025年05月04日8sky-heaven

我有一个关于 matplotlib.pyplot 的小问题,我希望之前有人遇到过它。

我有包含 X、Y、e 值的数据,这些值是变量的 X、Y 测量值,e 是 Y 中测量值的误差。我需要以对数对数刻度绘制它们。

我使用 plt.errorbars 函数绘制它们,然后将 yscale 和 xscale 设置为 log,这工作正常。但我还需要在同一个图表上绘制一条线,该线需要采用线性比例。

我可以单独完成这些图,但如果可能的话,我希望将它们放在同一张图片中。你有什么想法?我正在发布我目前所做的事情。

干杯, 和服

    tdlist = np.array([0.01,0.02,0.05,0.1,0.2,0.3,0.4,0.5,0.8,1,2,5,10,15,20,25,30,40,60,80,100,150,200,250,300,400]) 
    freqlist=np.array([30,40,50,60,70,80,90,100,110,120,140,160,180,200,220,250,300,350,400,450]) 
 
    filename=opts.filename 
 
    data = reader(filename) 
    data2 = logconv(data) 
 
    #x,y,e the data. Calculating usefull sums 
    x = data2[0] 
    y = data2[1] 
    e = data2[2] 
 
    xoe2 = np.sum(x/e**2) 
    yoe2 = np.sum(y/e**2) 
    xyoe2 = np.sum(x*y/e**2) 
    oe2 = np.sum(1/e**2) 
    x2oe2 = np.sum(x**2/e**2) 
 
    aslope = (xoe2*yoe2-xyoe2*oe2)/(xoe2**2-x2oe2*oe2) 
    binter = (xyoe2-aslope*x2oe2)/xoe2 
    aerr = np.sqrt(oe2/(x2oe2*oe2-xoe2**2)) 
    berr = np.sqrt(x2oe2/(x2oe2*oe2-xoe2**2)) 
 
    print('slope is ',aslope,' +- ', aerr) 
    print('inter is ',binter,' +- ', berr) 
 
    fig = plt.figure() 
ax1 = fig.add_subplot(1,1,1) 
ax2 = fig.add_axes(ax1.get_position(), frameon=False) 
 
ax1.errorbar(data[0],data[1],yerr=data[2],fmt='o') 
ax1.set_xscale('log',basex=10) 
ax1.set_yscale('log',basey=10) 
ax1.set_yticks([]) 
ax1.set_xticks([]) 
 
 
ax2.plot(x,aslope*x+binter,'r') 
ax2.plot(x,(aslope-aerr)*x+(binter+berr),'--') 
ax2.plot(x,(aslope+aerr)*x+(binter-berr),'--') 
ax2.set_xscale('linear') 
ax2.set_yscale('linear') 
plt.xticks(np.log10(freqlist),freqlist.astype('int')) 
plt.yticks(np.log10(tdlist),tdlist.astype('float')) 
 
plt.xlabel('Frequency (MHz)') 
plt.ylabel('t_s (msec)') 
fitndx1 = 'Fit slope '+"{0:.2f}".format(aslope)+u"\u00B1"+"{0:.2f}".format(aerr) 
plt.legend(('Data',fitndx1)) 
 
 
 
 
plt.show() 

按照 Molly 的建议,我设法接近了我的目标,但仍然没有达到。我正在为我正在尝试做的事情添加更多信息,这可能会澄清一些事情。

我将 ax1 设置为使用对数对数刻度的误差条图。我需要使用 errorbar 而不是 loglog plot,这样我就可以用我的观点显示错误。

我正在使用 ax2 以线性比例绘制线性拟合。

此外,我不希望 x 和 y 轴显示 10,100,1000 的 10 次方的值,但我自己的轴标签具有我想要的间距,因此我使用 plt.xticks。我尝试了 ax1.set_yticks 和 ax1.set_yticklabes 但没有成功。下面是我得到的图像。

我没有足够的声誉来发布图片,但这是上传的链接

http://postimg.org/image/uojanigab/

我的点的值应该是 x 范围 = 40 - 80 和 y 范围 = 5 -200,就像现在的拟合线一样。

请您参考如下方法:

您可以使用 figure 的 add_suplot 方法创建两个重叠轴.这是一个例子:

from matplotlib import pyplot as plt 
 
fig = plt.figure() 
ax1 = fig.add_subplot(1,1,1) 
ax2 = fig.add_axes(ax1.get_position(), frameon=False) 
 
ax1.loglog([1,10,100,1000],[1000,1,100,10]) 
ax2.plot([5,10,11,13],'r') 
 
plt.show() 

然后您可以像这样关闭线性比例图的 x 和 y 刻度:

ax2.set_xticks([]) 
ax2.set_yticks([])