Skip to main content
 首页 » 编程设计

python之运行 Galsim 时的 FFT 运行时错误

2024年10月25日9luoye11

运行脚本保存动画时,我不断收到以下错误:

RuntimeError: SB Error: fourierDraw() requires an FFT that is too large, 6144 
If you can handle the large FFT, you may update gsparams.maximum_fft_size. 

所以我进入了/Galsim/include/galsim/GSparams.h

我更改了以下内容

从 maximum_fft_size(4096) 到 maximum_fft_size(16384)

或 2^12 中的 2^14。

我仍然得到和以前一样的错误。我应该重新启动我的机器还是什么?

请您参考如下方法:

这不是更改 maximum_fft_size 参数的地方。有关如何使用 GSParams 对象和更新参数的示例,请参见 demo7。 GSObject 的文档字符串中还有一个示例:

    >>> gal = galsim.Sersic(n=4, half_light_radius=4.3) 
    >>> psf = galsim.Moffat(beta=3, fwhm=2.85) 
    >>> conv = galsim.Convolve([gal,psf]) 
    >>> im = galsim.Image(1000,1000, scale=0.05)        # Note the very small pixel scale! 
    >>> im = conv.drawImage(image=im)                   # This uses the default GSParams. 
    Traceback (most recent call last): 
      File "<stdin>", line 1, in <module> 
      File "galsim/base.py", line 1236, in drawImage 
        image.added_flux = prof.SBProfile.draw(imview.image, gain, wmult) 
    RuntimeError: SB Error: fourierDraw() requires an FFT that is too large, 6144 
    If you can handle the large FFT, you may update gsparams.maximum_fft_size. 
    >>> big_fft_params = galsim.GSParams(maximum_fft_size=10240) 
    >>> conv = galsim.Convolve([gal,psf],gsparams=big_fft_params) 
    >>> im = conv.drawImage(image=im)                   # Now it works (but is slow!) 
    >>> im.write('high_res_sersic.fits')