我正在尝试制作圆形衍射图案, 它有一个被一系列环包围的中心点。 它涉及代码中定义的贝塞尔积分。
我的问题是它花费的时间太长,就像我等待代码运行 10 分钟但没有显示任何内容。我知道这是因为我的贝塞尔积分每个点有 1000 次迭代,有人可以帮忙吗?
我走在正确的轨道上吗?
我正在尝试通过 Mark Newman 的书《计算物理学》自学自己 python 和计算物理学练习是计算物理学的 5.4。这是该章的链接。它在第 9 页。 http://www-personal.umich.edu/~mejn/cp/chapters/int.pdf
这是我要制作的图像。
.
我的代码:
import numpy as np
import pylab as plt
import math as mathy
#N = number of slicices
#h = b-a/N
def J(m,x): #Bessel Integral
def f(theta):
return (1/mathy.pi)*mathy.cos(m*theta - x*mathy.sin(theta)) #I replaced np. with mathy. for this line
N = 1000
A = 0
a=0
b=mathy.pi
h = ((b-a)/N)
for k in range(1,N,2):
A += 4*f(a + h*k)
for k in range(2,N,2):
A += 2*f(a + h*k)
Idx = (h/3)*(A + f(a)+f(b))
return Idx
def I(lmda,r): #Intensity
k = (mathy.pi/lmda)
return ((J(1,k*r))/(k*r))**2
wavelength = .5 # microm meters
I0 = 1
points = 500
sepration = 0.2
Intensity = np.empty([points,points],np.float)
for i in range(points):
y = sepration*i
for j in range(points):
x = sepration*j
r = np.sqrt((x)**2+(y)**2)
if r < 0.000000000001:
Intensity[i,j]= 0.5 #this is the lim as r -> 0, I -> 0.5
else:
Intensity[i,j] = I0*I(wavelength,r)
plt.imshow(Intensity,vmax=0.01,cmap='hot')
plt.gray()
plt.show()
请您参考如下方法:
您的代码似乎运行良好 - 如果我将 N 减少到 100(从 1000)并将图像大小(点)减少到 50(从 500)。大约 4 秒的执行时间后,我得到以下图像:
这是我们使用 cProfile 分析您的代码时得到的结果:
$ python -m cProfile -s time bessel.py | head -n 10
361598 function calls (359660 primitive calls) in 3.470 seconds
Ordered by: internal time
ncalls tottime percall cumtime percall filename:lineno(function)
252399 2.250 0.000 2.250 0.000 bessel.py:24(f)
2499 0.821 0.000 3.079 0.001 bessel.py:23(J)
1 0.027 0.027 3.472 3.472 bessel.py:15(<module>)
2499 0.015 0.000 3.093 0.001 bessel.py:45(I)
1 0.013 0.013 0.013 0.013 backend_macosx.py:1(<module>)
所以看起来你的大部分执行时间都花在了 f 上。您可以优化此功能,或者尝试使用 PyPy 运行您的代码. PyPy 非常擅长优化这类事情。您需要安装他们的 numpy 版本(参见 http://pypy.readthedocs.org/en/latest/getting-started.html# )。但是 PyPy 在我的机器上在 40 秒内完成了您的原始代码(删除了绘图内容)。
编辑
我没有在我的系统上的 PyPy 中安装 plotlib,所以我在最后替换了你的 plt 调用
#plt.imshow(Intensity,vmax=0.01,cmap='hot')
#plt.gray()
#plt.show()
np.savetxt('bessel.txt', Intensity)
并创建了一个我用普通 Python 执行的单独程序,其中包含:
import numpy as np
import pylab as plt
Intensity = np.loadtxt('bessel.txt')
plt.imshow(Intensity,vmax=0.01,cmap='hot')
plt.gray()
plt.show()
这会生成下图,并对您的代码进行以下修改:
sepration = 0.008 # decrease separation
Intensity = np.empty([points,points],np.float)
for i in range(points):
y = sepration*(i - points/2) # centre on image
for j in range(points):
x = sepration*(j - points/2)
