Skip to main content
 首页 » 编程设计

python之如何在 Mayavi2 中加入/连接/分组多个对象

2024年11月01日1298°冷暖

我想将多个 Mayavi 对象组合成一个“分组”对象,这样我就可以一起控制它们的所有属性。例如,我通过组合 3 个内置曲面(两个球体和一个圆柱体)创建了以下双凸透镜形状。现在我想一次(不是单独)为所有组成表面分配统一的属性(镜面反射、环境颜色等)。另外,我想将镜头作为一个整体进行平移/旋转。我不确定如何完成此操作。

这是在 Mayavi 中创建的双凸透镜(代码如下):

如下图所示,上面的镜头由三个面组成:


这是构建双凸透镜的代码:


import numpy as np 
from mayavi import mlab 
from mayavi.sources.builtin_surface import BuiltinSurface 
from mayavi.modules.surface import Surface 
from mayavi.filters.transform_data import TransformData 
 
 
def lensUsingMayaviBuiltinSphere(radius=0.5, semiDiam=0.25, thickness=0.9): 
    """ 
    Render a bi-convex lens 
    """ 
    engine = mlab.get_engine() 
    sag = radius - np.sqrt(radius**2 - semiDiam**2) 
    cyl_height = thickness - 2.0*sag   # thickness of the cylinder in between 
    # Create Mayavi data sources -- sphere_h1_src, sphere_h2_src, cylinder_src     
    # half 1: source = sphere_h1_src 
    sphere_h1_src = BuiltinSurface() 
    engine.add_source(sphere_h1_src) 
    sphere_h1_src.source = 'sphere' 
    sphere_h1_src.data_source.radius = radius 
    sphere_h1_src.data_source.center = np.array([ 0.,  0.,  -np.sqrt(radius**2 - semiDiam**2) + cyl_height/2.0]) 
    sphere_h1_src.data_source.end_phi = np.rad2deg(np.arcsin(semiDiam/radius)) #60.0 
    sphere_h1_src.data_source.end_theta = 360.0 
    sphere_h1_src.data_source.phi_resolution = 300 
    sphere_h1_src.data_source.theta_resolution = 300 
    # half 2: source = sphere_h2_src 
    sphere_h2_src = BuiltinSurface() 
    engine.add_source(sphere_h2_src) 
    sphere_h2_src.source = 'sphere' 
    sphere_h2_src.data_source.radius = radius 
    sphere_h2_src.data_source.center = np.array([ 0.,  0.,  np.sqrt(radius**2 - semiDiam**2) - cyl_height/2.0]) 
    sphere_h2_src.data_source.start_phi = 180.0 - np.rad2deg(np.arcsin(semiDiam/radius)) 
    sphere_h2_src.data_source.end_phi = 180.0 
    sphere_h2_src.data_source.end_theta = 360.0 
    sphere_h2_src.data_source.phi_resolution = 300 
    sphere_h2_src.data_source.theta_resolution = 300 
    # cylinder source data in between  
    cylinder_src = BuiltinSurface() 
    engine.add_source(cylinder_src) 
    cylinder_src.source = 'cylinder' 
    cylinder_src.data_source.center = np.array([ 0.,  0.,  0.]) 
    if cyl_height > 0: 
        cylinder_src.data_source.height = cyl_height 
    else: 
        cylinder_src.data_source.height = 0.0 
    cylinder_src.data_source.radius = semiDiam 
    cylinder_src.data_source.capping = False 
    cylinder_src.data_source.resolution = 50 
 
    # Add transformation filter to align cylinder length along z-axis 
    transform_data_filter = TransformData() 
    engine.add_filter(transform_data_filter, cylinder_src) 
    Rt_c = [ 1.0000,  0.0000,  0.0000,  0.00, 
             0.0000,  0.0000, -1.0000,  0.00, 
             0.0000,  1.0000,  0.0000,  0.00,  
             0.0000,  0.0000,  0.0000,  1.00] 
    transform_data_filter.transform.matrix.__setstate__({'elements': Rt_c}) 
    transform_data_filter.widget.set_transform(transform_data_filter.transform) 
    transform_data_filter.filter.update() 
    transform_data_filter.widget.enabled = False   # disable the rotation control further. 
 
    # Add surface modules to each source 
    right_surface = Surface() 
    engine.add_filter(right_surface, sphere_h1_src) 
    left_surface = Surface() 
    engine.add_filter(left_surface, sphere_h2_src) 
    cyl_surface = Surface() 
    engine.add_filter(cyl_surface, transform_data_filter) 
 
 
fig = mlab.figure() 
# Add lens 
lensUsingMayaviBuiltinSphere(radius=2, semiDiam=1.2) 
mlab.show() 

请您参考如下方法:

我不知道有什么方法可以按照您正在寻找的方式组合资源。我认为事实上这可能是不可能的,因为在引擎盖下 BuiltinSurface 对象具有特定的 vtk 源,这不是您想要的。但是,应该可以简单地使用提供您想要的内容的不同来源。在这种情况下,您可以使用 mlab.mesh 生成双凸透镜:

a,c,h=3,1,.2 
 
phi,theta = np.mgrid[0:2*np.pi:np.pi/250, 0:2*np.pi:np.pi/250] 
x=a*np.cos(theta)*np.sin(phi) 
y=a*np.sin(theta)*np.sin(phi) 
z=c*np.cos(phi)+(h*(-1)**(np.cos(phi)<0)) 
 
mlab.mesh(x,y,z,color=(1,1,1) 
mlab.show() 

一个细微的差别是这个表面是光滑的。这是对单个表面进行采样的本质——即,此结果是您的问题要求执行的操作的直接结果。如果这是您的图形的一个重要特征,我会建议一种完全不同的方法:将 3 个源包装在一个类中,并让事件处理程序更新所有三个的相关属性。