Skip to main content
 首页 » 编程设计

Python pyserial之windows错误(二)

2024年11月01日13kevingrace

我正在尝试使用 pyserial 库将我的 arduino 连接到 python,但我一直收到错误。我已连接我的 arduino,但 arduino 程序的串行未运行。我不断收到此错误:

Traceback (most recent call last): 
  File "<pyshell#0>", line 1, in <module> 
    j = arduino() 
  File "C:\Users\Dhruv and Anuj\Documents\Dhruv K. Patel\Python Files\bitSnake_source\bitSnake\glove_input.py", line 9, in __init__ 
    ser = serial.Serial(port, 9600) 
  File "C:\Python32\lib\site-packages\serial\serialwin32.py", line 38, in __init__ 
    SerialBase.__init__(self, *args, **kwargs) 
  File "C:\Python32\lib\site-packages\serial\serialutil.py", line 282, in __init__ 
    self.open() 
  File "C:\Python32\lib\site-packages\serial\serialwin32.py", line 66, in open 
    raise SerialException("could not open port %r: %r" % (self.portstr, ctypes.WinError())) 
serial.serialutil.SerialException: could not open port 'COM1': WindowsError(2, 'The system cannot find the file specified.') 

这是我的arduino代码:

int speed = 10; 
 
const int thumb = 2; 
const int index = 3; 
const int middle = 4; 
const int ring = 5; 
const int pinky = 6; 
 
String out; 
 
 
void setup(){ 
  pinMode(thumb,INPUT); 
  pinMode(index,INPUT); 
  pinMode(middle,INPUT); 
  pinMode(ring,INPUT); 
  pinMode(pinky,INPUT); 
  Serial.begin(9600); 
} 
 
void loop(){ 
  boolean repeat = true; 
  if(repeat == true){ 
    if(digitalRead(thumb) == HIGH){ 
      Serial.write(1); 
      Serial.println(1); 
      repeat = false; 
    } 
    if(digitalRead(index) == HIGH){ 
      Serial.write(2); 
      Serial.println(2); 
      repeat = false; 
    } 
    if(digitalRead(middle) == HIGH){ 
      Serial.write(3); 
      Serial.println(3); 
      repeat = false; 
    } 
    if(digitalRead(ring) == HIGH){ 
      Serial.write(4); 
      Serial.println(4); 
      repeat = false; 
    } 
    if(digitalRead(pinky) == HIGH){ 
      Serial.write(5); 
      Serial.println(5); 
      repeat = false; 
    } 
  } 
  if(repeat == true){ 
    Serial.write(0); 
    Serial.println(0); 
  } 
  delay(10); 
} 

还有我的 python 代码:

import serial 
from serial import * 
port = 0 
 
class arduino: 
 
    def __init__(self): 
        #serial.tools.list_ports() 
        ser = serial.Serial(port, 9600) 
        self.port = str(port) 
 
    def read(self): 
 
        return ser.readline() 
 
    def close(self): 
 
        ser.close() 

任何帮助都会很棒,谢谢!!

请您参考如下方法:

尝试另一个 COM 端口。你的 arduino 显然不在 COM1 上。