Skip to main content
 首页 » 编程设计

python之PIL.Image.open() IOError : cannot identify image file

2024年11月01日8kenshinobiy

显然,这在 Python 中是一个相当普遍的问题(请参阅 here、here 和 here),但我无法理解为什么这个脚本会发生这种情况,我从 here 中获取了该脚本。 .我附上了导致问题的代码片段,以及最小工作示例 (MWE) 和错误跟踪。有人可以告诉我我做错了什么。谢谢。

片段:

def captureTestImage(): 
    command = "raspistill -w %s -h %s -t 0 -e bmp -o -" % (100, 75) 
    imageData = StringIO.StringIO() 
    imageData.write(subprocess.check_output(command, shell=True)) 
    imageData.seek(0) 
    im = Image.open(imageData) 
    buffer = im.load() 
    imageData.close() 
    return im, buffer 

错误跟踪:

Traceback (most recent call last): 
  File "./test2.py", line 61, in <module> 
    image1, buffer1 = captureTestImage() 
  File "./test2.py", line 31, in captureTestImage 
    im = Image.open(imageData) 
  File "/usr/lib/python2.7/dist-packages/PIL/Image.py", line 1980, in open 
    raise IOError("cannot identify image file") 
IOError: cannot identify image file 

MWE:

#!/usr/bin/env python 
 
import StringIO 
import subprocess 
import os 
import time 
from datetime import datetime 
from PIL import Image 
 
# Motion detection settings: 
# Threshold (how much a pixel has to change by to be marked as "changed") 
# Sensitivity (how many changed pixels before capturing an image) 
# ForceCapture (whether to force an image to be captured every forceCaptureTime seconds) 
threshold = 10 
sensitivity = 20 
forceCapture = True 
forceCaptureTime = 60 * 60 # Once an hour 
 
# File settings 
saveWidth = 1280 
saveHeight = 960 
diskSpaceToReserve = 40 * 1024 * 1024 # Keep 40 mb free on disk 
 
# Capture a small test image (for motion detection) 
def captureTestImage(): 
    command = "raspistill -w %s -h %s -t 0 -e bmp -o -" % (100, 75) 
    imageData = StringIO.StringIO() 
    imageData.write(subprocess.check_output(command, shell=True)) 
    imageData.seek(0) 
    im = Image.open(imageData) 
    buffer = im.load() 
    imageData.close() 
    return im, buffer 
 
# Save a full size image to disk 
def saveImage(width, height, diskSpaceToReserve): 
    keepDiskSpaceFree(diskSpaceToReserve) 
    time = datetime.now() 
    filename = "capture-%04d%02d%02d-%02d%02d%02d.jpg" % (time.year, time.month, time.day, time.hour, time.minute, time.second) 
    subprocess.call("raspistill -w 1296 -h 972 -t 0 -e jpg -q 15 -o %s" % filename, shell=True) 
    print "Captured %s" % filename 
 
# Keep free space above given level 
def keepDiskSpaceFree(bytesToReserve): 
    if (getFreeSpace() < bytesToReserve): 
        for filename in sorted(os.listdir(".")): 
            if filename.startswith("capture") and filename.endswith(".jpg"): 
                os.remove(filename) 
                print "Deleted %s to avoid filling disk" % filename 
                if (getFreeSpace() > bytesToReserve): 
                    return 
 
# Get available disk space 
def getFreeSpace(): 
    st = os.statvfs(".") 
    du = st.f_bavail * st.f_frsize 
    return du 
 
# Get first image 
image1, buffer1 = captureTestImage() 
 
# Reset last capture time 
lastCapture = time.time() 
 
while (True): 
 
    # Get comparison image 
    image2, buffer2 = captureTestImage() 
 
    # Count changed pixels 
    changedPixels = 0 
    for x in xrange(0, 100): 
        for y in xrange(0, 75): 
            # Just check green channel as it's the highest quality channel 
            pixdiff = abs(buffer1[x,y][1] - buffer2[x,y][1]) 
            if pixdiff > threshold: 
                changedPixels += 1 
 
    # Check force capture 
    if forceCapture: 
        if time.time() - lastCapture > forceCaptureTime: 
            changedPixels = sensitivity + 1 
 
    # Save an image if pixels changed 
    if changedPixels > sensitivity: 
        lastCapture = time.time() 
        saveImage(saveWidth, saveHeight, diskSpaceToReserve) 
 
    # Swap comparison buffers 
    image1 = image2 
    buffer1 = buffer2 

请您参考如下方法:

天哪,我觉得我真的很傻,但这根本不是软件问题,而是 Raspi 不稳定的问题。结果是没有加载相机的正确驱动程序,所以相机没有拍照,而是产生了一个错误。只需重新启动即可。