Skip to main content
 首页 » 编程设计

python之如何使用 Python 在 Raspberry Pi 和 Bluegiga WT11i 蓝牙模块之间建立连接

2024年11月01日8over140

我正在尝试使用 Python 在我的 RaspberryPi 和 Bluegiga WT11i 蓝牙模块之间建立连接。

至此我来了:

pi@raspberrypi ~ $ hcitool scan 
Scanning ... 
        00:07:80:54:CA:E2       BGWT11i 

接下来...

pi@raspberrypi ~ $ python sdp-browse.py 00:07:80:54:CA:E2 
found 1 services on 00:07:80:54:CA:E2 
 
Service Name: Bluetooth Serial Port 
  Host: 00:07:80:54:CA:E2 
  Description: None 
  Provided By: None 
  Protocol: RFCOMM 
  channel/PSM: 1 
  svc classes: ['00001101-0000-1000-8000-00805F9B34FB'] 
  profiles: [] 
  service id: None 

接下来...

pi@raspberrypi ~ $ python rfcomm-client.py 00:07:80:54:CA:E2 
searching 00:07:80:54:CA:E2 for service 
connecting to "Bluetooth Serial Port" on 00:07:80:54:CA:E2 
Traceback (most recent call last): 
  File "rfcomm-client.py", line 28, in <module> 
    sock.connect((host, port)) 
  File "<string>", line 5, in connect 
bluetooth.btcommon.BluetoothError: (111, 'Connection refused') 

这是代码(来自 PyBluez 示例)...

sdp-浏览器.py:

import sys 
import bluetooth 
 
if len(sys.argv) < 2: 
        print "usage: sdp-browser <addr>" 
        print "   addr can be a bluetooth address, \"localhost\" or \"all\"" 
        sys.exit(2) 
 
target = sys.argv[1] 
if target == "all" : target = None 
 
services = bluetooth.find_service(address=target) 
 
if len(services) > 0: 
        print "found %d services on %s" % (len(services), sys.argv[1]) 
        print 
else: 
        print "no services found" 
 
for svc in services: 
        print "Service Name: %s" % svc["name"] 
        print "  Host: %s" % svc["host"] 
        print "  Description: %s" % svc["description"] 
        print "  Provided By: %s" % svc["provider"] 
        print "  Protocol: %s" % svc["protocol"] 
        print "  channel/PSM: %s" % svc["port"] 
        print "  svc classes: %s" % svc["service-classes"] 
        print "  profiles: %s" % svc["profiles"] 
        print "  service id: %s" % svc["service-id"] 

rfcomm-client.py:

from bluetooth import * 
import sys 
 
addr = None 
 
if len(sys.argv) < 2: 
        print "need address" 
        sys.exit(0) 
else: 
        addr = sys.argv[1] 
        print "searching %s for service" % sys.argv[1] 
 
uuid = "00001101-0000-1000-8000-00805f9b34fb" 
service_matches = find_service( uuid = uuid, address = addr ) 
 
if len(service_matches) == 0: 
        print "couldn't find the service =(" 
        sys.exit(0) 
 
first_match = service_matches[0] 
port = first_match["port"] 
name = first_match["name"] 
host = first_match["host"] 
 
print "connecting to \"%s\" on %s" % (name, host) 
 
sock=BluetoothSocket( RFCOMM ) 
sock.connect((host, port)) 
 
print "connected. type stuff" 
while True: 
        data = raw_input() 
        if len(data) == 0: break; 
        sock.send("%s\n\r" % data) 
 
sock.close() 

我能做什么?

请您参考如下方法:

知道了!!

pi@raspberrypi ~ $ aptitude install bluetooth 
pi@raspberrypi ~ $ hcitool dev 
Devices: 
   hci0   00:07:80:54:CA:E2 
 
pi@raspberrypi ~ $ hcitool scan 
Scanning ... 
        00:07:80:54:CA:E2   BGWT11i 
 
pi@raspberrypi ~ $ bluez-simple-agent hci0 00:07:80:54:CA:E2 
Enter PIN Code: 1234 

现在我可以连接...

pi@raspberrypi ~ $ python rfcomm-client.py 00:07:80:54:CA:E2