我有一个用 Fortran 编写的基于 MPI 的程序,它在每个节点(2D 时间序列的部分)生成复杂数据的 3D 数组。我想使用并行 I/O 将这些数组写入单个文件,该文件可以相对容易地在 python 中打开以进行进一步分析/可视化。理想情况下,我希望解决方案具有内存效率(即避免创建中间临时数组)。
使用 NetCDF,我成功地改编了一个 subroutine这对于实数的 3D 数组实现了这一点。但是,在涉及复杂数组时,我遇到了绊脚石。
在下面的代码中,我尝试通过创建一个由两个实数组成的复合数据类型并假设 Fortran 复数数据类型的实部和虚部连续存储在3D阵列。
module IO
use NetCDF
use, intrinsic :: iso_fortran_env, only: dp => real64
implicit none
contains
subroutine output_3D(dataname, starts, ends, global_data_dims, &
local_data, MPI_communicator)
character(len=*), intent(in) :: dataname
integer, dimension(3), intent(in) :: starts
integer, dimension(3), intent(in) :: ends
integer, dimension(3), intent(in) :: global_data_dims
complex(dp), intent(in) :: local_data( 1:(ends(1) - starts(1)+ 1), &
1:(ends(2) - starts(2) + 1), &
1:(ends(3) - starts(3) + 1))
integer, dimension(3) :: expanded_starts
integer, intent(in) :: MPI_communicator
integer :: ncid, varid, dimid(3)
integer :: counts(3)
integer :: typeid
expanded_starts(1) = (starts(1))* 2 + 1
expanded_starts = starts(2)
expanded_starts(3) = starts(3)
call check(nf90_create( trim(dataname)//'.cdf', &
IOR(NF90_NETCDF4, NF90_MPIIO), &
ncid, &
comm = MPI_communicator, &
info = MPI_INFO_NULL))
call check(nf90_def_dim(ncid, "x", global_data_dims(1), dimid(1)))
call check(nf90_def_dim(ncid, "y", global_data_dims(2) * 2, dimid(2)))
call check(nf90_def_dim(ncid, "z", global_data_dims(3), dimid(3)))
! define a complex data type consisting of two real(8)
call check(nf90_def_compound(ncid, 16, "COMPLEX", typeid))
call check(nf90_insert_compound(ncid, typeid, "REAL", 0, NF90_DOUBLE))
call check(nf90_insert_compound(ncid, typeid, "IMAG", 8, NF90_DOUBLE))
! define a 3D variable of type "complex"
call check(nf90_def_var(ncid, dataname, typeid, dimid, varid))
! exit define mode
call check(nf90_enddef(ncid))
! Now in NETCDF data mode
! set to use MPI/PnetCDF collective I/O
call check(nf90_var_par_access(ncid, varid, NF90_COLLECTIVE))
counts(1) = (ends(1) - starts(1) + 1) * 2
counts(2) = (ends(2) - starts(2) + 1)
counts(3) = (ends(3) - starts(3) + 1)
call check(nf90_put_var(ncid, &
varid, &
local_data, &
start = expanded_starts,&
count = counts))
! close the file
call check(nf90_close(ncid))
return
end subroutine output_3D
subroutine check(status)
integer, intent ( in) :: status
if(status /= nf90_noerr) then
print *, trim(nf90_strerror(status))
stop 2
end if
end subroutine check
end module IO
program test_write
use IO
use MPI
complex(dp) :: data(2,2,3)
integer :: flock
integer :: rank
integer :: ierr
integer :: i, j, k
call MPI_init(ierr)
call MPI_comm_size(MPI_comm_world, flock, ierr)
call MPI_comm_rank(MPI_comm_world, rank, ierr)
do k = 1, 3
do j = 1, 2
do i = 1, 2
data(i,j,k) = cmplx(i, j, 8)
enddo
enddo
enddo
if (rank == 0) then
call output_3D_hdf5('out', [1,1,1], [2,2,3], [2,2,6], &
data, MPI_comm_world)
else
call output_3D_hdf5('out', [1,1,4], [2,2,6], [2,2,6], &
data, MPI_comm_world)
endif
call MPI_finalize(ierr)
end program test_write
以上代码导致编译时出现“There is no specific function for nf90_put_var”错误。这表明该函数对输入数组的数据类型不满意,因此很明显我在复合数据类型的使用方面遗漏了一些东西。
编辑:一个简单的解决方法是将复杂数组分配给一个真正的指针,如 this 中所述。邮政。然后可以使用 numpy reshape /重铸数组以在 python 中到达复杂数组。它有点笨重,有点不满意 - 但对于我现在的目的来说可能已经足够好了。
请您参考如下方法:
由于您将在下面看到的原因,这只是部分答案 - 但对于评论来说太长了。希望我能够找到丢失的信息并“升级”它,但这是我目前所拥有的。
如果您在 https://www.unidata.ucar.edu/software/netcdf/fortran/docs/f90-user-defined-data-types.html#f90-compound-types-introduction 的“复合类型介绍”下查看 NetCDF4 文档你会看到:
To write data in a compound type, first use
nf90_def_compoundto create the type, multiple calls tonf90_insert_compoundto add to the compound type, and then write data with the appropriatenf90_put_var1,nf90_put_vara,nf90_put_vars, ornf90_put_varm call.
请注意,它根本没有提到 nf90_put_var,而是提到了 4 个不同的函数。这在某种程度上是有道理的,nf90_put_var 可能很好地重载以处理 NetCDF 支持的所有内在类型(而且它完全是废话,它不支持复数),因此对于非内在类型,大概有一些 C 语言类似于带有类似 void * 的接口(interface),我猜这就是上面提到的四个函数实现的。
到目前为止一切顺利,您应该调用 nf90_put_var1、nf90_put_vara、nf90_put_vars 或 nf90_put_varm 之一比 nf90_put_var。现在是坏消息——我找不到这 4 个函数的任何文档。等效的 C 函数位于 https://www.unidata.ucar.edu/software/netcdf/docs/group__variables.html。所以你也许可以从那里找出需要什么,但这不是很好——我至少会向 Unidata 提交错误报告,但这对我来说缺乏对复杂的内在支持就足以让我在别处寻找我的 I/O 解决方案 ...
虽然我在这里,但您确实不应该为变量的种类使用显式数字,我可以向您展示编译器,其中 complex(8) 将无法编译。而是使用 Selected_real_kind 或类似的,或者使用内部模块 iso_fortran_env 中的常量,或者可能是 iso_c_binding 中的常量,以及复数的种类与组成实数的种类相同的事实
