我有以下数据框:
Trajectory Direction Resulting_Direction
STRAIGHT NORTH NORTH
STRAIGHT NaN NORTH
LEFT NaN WEST
LEFT NaN WEST
LEFT NaN WEST
STRAIGHT NaN WEST
STRAIGHT NaN WEST
RIGHT NaN NORTH
RIGHT NaN NORTH
RIGHT NaN NORTH
我的目标是在遇到三个直线轨迹时改变方向。因此,在此示例中,我的新列将是 Resulting_Direction(假设它最初不在 df 中)。
目前我正在通过逐行 if 语句来做到这一点。然而,这是非常缓慢和低效的。我希望使用掩码在它转动的行中设置结果方向,然后使用 fillna(method="ffill")。这是我的尝试:
df.loc[:,'direction'] = np.NaN
df.loc[df.index == 0, "direction"] = "WEST"
# mask is for finding when a signal hasnt changed in three seconds, but now has
mask = (df.trajectory != df.trajectory.shift(1)) & (df.trajectory == df.trajectory.shift(-1)) & (df.trajectory == df.trajectory.shift(-2))
df.loc[(mask) & (df['trajectory'] == 'LEFT') & (df['direction'].dropna().shift() == "WEST"),'direction'] = 'SOUTH'
df.loc[(mask) & (df['trajectory'] == 'LEFT') & (df['direction'].dropna().shift() == "SOUTH"),'direction'] = 'EAST'
df.loc[(mask) & (df['trajectory'] == 'LEFT') & (df['direction'].dropna().shift() == "EAST"),'direction'] = 'NORTH'
df.loc[(mask) & (df['trajectory'] == 'LEFT') & (df['direction'].dropna().shift() == "NORTH"),'direction'] = 'WEST'
df.loc[(mask) & (df['trajectory'] == 'RIGHT') & (df['direction'].dropna().shift() == "WEST"),'direction'] = 'NORTH'
df.loc[(mask) & (df['trajectory'] == 'RIGHT') & (df['direction'].dropna().shift() == "SOUTH"),'direction'] = 'WEST'
df.loc[(mask) & (df['trajectory'] == 'RIGHT') & (df['direction'].dropna().shift() == "EAST"),'direction'] = 'SOUTH'
df.loc[(mask) & (df['trajectory'] == 'RIGHT') & (df['direction'].dropna().shift() == "NORTH"),'direction'] = 'EAST'
df.loc[:,'direction'] = df.direction.fillna(method="ffill")
print(df[['trajectory','direction']])
我认为我的问题出在 df['direction'].dropna().shift() 中。如何在同一列中找到不是 NaN 的先前值?
请您参考如下方法:
IIUC,问题是检测方向改变的位置,据说是在 3 个连续改变命令的开头:
thresh = 3
# mark the consecutive direction commands
blocks = df.Trajectory.ne(df.Trajectory.shift()).cumsum()
# group by blocks
groups = df.groupby(blocks)
# enumerate each block
df['mask'] = groups.cumcount()
# shift up to mark the beginning
# mod thresh to divide each block into small block of thresh
df['mask'] = groups['mask'].shift(1-thresh) % thresh
# for conversion of direction to letters:
changes = {'LEFT': -1,'RIGHT':1}
# all the directions
directions = ['NORTH', 'EAST', 'SOUTH', 'WEST']
# update directions according to the start direction
start = df['Direction'].iloc[0]
start_idx = directions.index(start)
directions = {k%4: v for k,v in enumerate(directions, start=start_idx)}
# update direction changes
direction_changes = (df.Trajectory
.where(df['mask'].eq(2)) # where the changes happends
.map(changes) # replace the changes with number
.fillna(0) # where no direction change is 0
)
# mod 4 for the 4 direction
# and map
df['Resulting_Direction'] = (direction_changes.cumsum() % 4).map(directions)
输出:
Trajectory Direction Resulting_Direction mask
0 STRAIGHT NORTH NORTH NaN
1 STRAIGHT NaN NORTH NaN
2 LEFT NaN WEST 2.0
3 LEFT NaN WEST NaN
4 LEFT NaN WEST NaN
5 STRAIGHT NaN WEST NaN
6 STRAIGHT NaN WEST NaN
7 RIGHT NaN NORTH 2.0
8 RIGHT NaN NORTH NaN
9 RIGHT NaN NORTH NaN
