Skip to main content
 首页 » 编程设计

python之瀑布图中 "virtual third axis"的正确 matplotlib 转换是什么

2024年11月24日9shangdawei

在努力改进我对 this question 的回答时,我跌跌撞撞地走进了死胡同。

我想要实现的,是在 matplotlib 中创建一个“假的”3D 瀑布图,其中各个线图(或可能的任何其他图类型)在图像素坐标并绘制在彼此后面。这部分已经工作正常,并且使用我的代码示例(见下文)你应该能够绘制十个 等效 线,它们在 x 中被 fig.dpi/10. 偏移- 和 y 方向,并通过 zorder 绘制在彼此后面。

请注意,我还添加了 fill_between() 以使“深度提示”zorder 更加可见。

我卡住的地方是我想添加一个“第三轴”,即一条线(稍后可能用一些刻度线格式化)与基线正确对齐(即 [ 0,0] 每行的数据单位)。

由于这不是一次性的事情(即解决方案不应该只能在静态像素坐标中工作),但必须在重新缩放时正确运行,所以这个问题可能会变得更加复杂, 尤其是在交互工作时。 如您所见,设置例如xlim 允许“按预期”重新缩放线条(如果您以交互方式尝试最好),但我尝试插入的红线( future 轴)并没有以相同的方式转置作为每个线图的基础。

我不是在寻找是依赖于 mpl_toolkits.mplot3d 的 Axes3D 的解决方案,因为这会导致 关于 zorder 和缩放的许多其他问题,这正是我想通过提出我自己的“假 3D 绘图”试图避免的问题。

import numpy as np 
import matplotlib as mpl 
import matplotlib.pyplot as plt 
from matplotlib.transforms import Affine2D,IdentityTransform 
 
def offset(myFig,myAx,n=1,xOff=60,yOff=60): 
    """ 
        this function will apply a shift of  n*dx, n*dy 
        where e.g. n=2, xOff=10 would yield a 20px offset in x-direction 
    """ 
    ## scale by fig.dpi to have offset in pixels! 
    dx, dy = xOff/myFig.dpi , yOff/myFig.dpi  
    t_data = myAx.transData  
    t_off = mpl.transforms.ScaledTranslation( n*dx, n*dy, myFig.dpi_scale_trans) 
    return t_data + t_off 
 
fig,axes=plt.subplots(nrows=1, ncols=3,figsize=(10,5)) 
 
ys=np.arange(0,5,0.5) 
print(len(ys)) 
 
## just to have the lines colored in some uniform way 
cmap = mpl.cm.get_cmap('viridis') 
norm=mpl.colors.Normalize(vmin=ys.min(),vmax=ys.max()) 
 
## this defines the offset in pixels 
xOff=10  
yOff=10 
 
for ax in axes: 
    ## plot the lines 
    for yi,yv in enumerate(ys): 
        zo=(len(ys)-yi) 
        ax.plot([0,0.5,1],[0,1,0],color=cmap(norm(yv)), 
                zorder=zo, ## to order them "behind" each other 
        ## here we apply the offset to each plot: 
                transform=offset(fig,ax,n=yi,xOff=xOff,yOff=yOff) 
        ) 
 
        ### optional: add a fill_between to make layering more obvious 
        ax.fill_between([0,0.5,1],[0,1,0],0, 
                facecolor=cmap(norm(yv)),edgecolor="None",alpha=0.1, 
                zorder=zo-1, ## to order them "behind" each other 
        ## here we apply the offset to each plot: 
                transform=offset(fig,ax,n=yi,xOff=xOff,yOff=yOff) 
        ) 
 
    ################################## 
    ####### this is the important bit: 
    ax.plot([0,2],[0,2],color='r',zorder=100,clip_on=False, 
        transform=ax.transData+mpl.transforms.ScaledTranslation(0.,0., fig.dpi_scale_trans) 
    ) 
 
## make sure to set them "manually", as autoscaling will fail due to transformations 
for ax in axes: 
    ax.set_ylim(0,2) 
 
axes[0].set_xlim(0,1) 
axes[1].set_xlim(0,2) 
axes[2].set_xlim(0,3) 
 
### Note: the default fig.dpi is 100, hence an offset of of xOff=10px will become 30px when saving at 300dpi! 
# plt.savefig("./test.png",dpi=300) 
 
plt.show() 

更新:

我现在在下面添加了一个动画,它显示了堆叠线在缩放/平移时的表现,以及它们的“基线”(蓝色圆圈)如何随绘图移动,而不是静态的 OriginLineTrans 解决方案(绿线)或我的转换线(红色,虚线)。

附着点观察到不同的变换并且可以通过以下方式插入:

ax.scatter([0],[0],edgecolors="b",zorder=200,facecolors="None",s=10**2,) 
ax.scatter([0],[0],edgecolors="b",zorder=200,facecolors="None",s=10**2,transform=offset(fig,ax,n=len(ys)-1,xOff=xOff,yOff=yOff),label="attachment points") 
 

请您参考如下方法:

问题归结为以下内容:

如何制作一条线

  • 从轴坐标中的原点 (0,0) 开始
  • 在物理坐标(像素空间)中以角度的角度进化

通过使用 matpotlib 转换?

问题是轴坐标中的原点可能会因子图位置而异。所以我看到的唯一选择是创建一些自定义转换

  • 转换为像素空间
  • 转换为像素空间中的原点
  • 按给定角度倾斜坐标系(例如,在 x 方向)
  • 转换回轴的原点

可能是这样的

import numpy as np 
import matplotlib.pyplot as plt 
import matplotlib.transforms as mtrans 
 
 
class OriginLineTrans(mtrans.Transform): 
    input_dims = 2 
    output_dims = 2 
    def __init__(self, origin, angle, axes): 
        self.axes = axes 
        self.origin = origin 
        self.angle = angle # in radiants 
        super().__init__() 
 
    def get_affine(self): 
        origin = ax.transAxes.transform_point(self.origin) 
        trans = ax.transAxes + \ 
                mtrans.Affine2D().translate(*(-origin)) \ 
                .skew(self.angle, 0).translate(*origin) 
        return trans.get_affine() 
 
 
 
fig, ax = plt.subplots() 
ax.plot([0,0], [0,1], transform=OriginLineTrans((0,0), np.arctan(1), ax)) 
 
plt.show() 

请注意,在原始问题的情况下,角度为 np.arctan(dx/dy)。