Skip to main content
 首页 » 编程设计

python之在检测到 python 时运行特定代码

2024年12月31日7Terrylee

此代码用于在检测到驾驶员困倦时播放警报

if args["alarm"] != "": 
    t = Thread(target=sound_alarm, 
        args=(args["alarm"],)) 
    t.daemon = False 
    t.start() 

整个代码如下所示:

if ear < EYE_AR_THRESH: 
        COUNTER += 1 
 
        # if the eyes were closed for a sufficient number of 
        # then sound the alarm 
        if COUNTER >= EYE_AR_CONSEC_FRAMES: 
 
            # if the alarm is not on, turn it on 
            if not ALARM_ON: 
                ALARM_ON = True 
 
                # check to see if an alarm file was supplied, 
                # and if so, start a thread to have the alarm 
                # sound played in the background 
                if args["alarm"] != "": 
                    t = Thread(target=sound_alarm, 
                        args=(args["alarm"],)) 
                    t.daemon = False 
                    t.start() 
 
            # draw an alarm on the frame 
            cv2.putText(frame, "DROWSINESS ALERT!", (10, 30), 
                cv2.FONT_HERSHEY_SIMPLEX, 0.7, (0, 0, 255), 2) 
            fan_on() 
 
 
 
 
# otherwise, the eye aspect ratio is not below the blink 
# threshold, so reset the counter and alarm 
else: 
    COUNTER = 0 
    ALARM_ON = False 
    fan_off() 

为了保持简单。如果检测到司机昏昏欲睡,就会发出警报。 当它检测到司机昏昏欲睡时,我该如何运行警报,因为在此期间警报只运行一次。

这是我的声音报警方法:

def sound_alarm(path): 
    pygame.mixer.init() 
    pygame.mixer.music.load(path) 
    pygame.mixer.music.play() 

提前致谢

请您参考如下方法:

我建议您使用 while循环,以便重复您的代码,直到某个条件变为False

while的主要结构循环看起来像:

while condition_which_is_true: 
    do_something() 

因此,在这种特殊情况下,我会执行以下操作:

if ear < EYE_AR_THRESH: 
    COUNTER += 1 
 
    # if the eyes were closed for a sufficient number of 
    # then sound the alarm 
    if COUNTER >= EYE_AR_CONSEC_FRAMES: 
 
        # if the alarm is not on, turn it on 
        while not ALARM_ON: 
            ALARM_ON = True 
 
            # check to see if an alarm file was supplied, 
            # and if so, start a thread to have the alarm 
            # sound played in the background 
            if args["alarm"] != "": 
                t = Thread(target=sound_alarm, 
                    args=(args["alarm"],)) 
                t.daemon = False 
                t.start() 
 
        # draw an alarm on the frame 
        cv2.putText(frame, "DROWSINESS ALERT!", (10, 30), 
            cv2.FONT_HERSHEY_SIMPLEX, 0.7, (0, 0, 255), 2) 
        fan_on() 
 
# otherwise, the eye aspect ratio is not below the blink 
# threshold, so reset the counter and alarm 
else: 
    COUNTER = 0 
    ALARM_ON = False 
    fan_off() 

请注意,由于您没有提供完整的代码示例,因此很难为您提供帮助