我已经绘制了扩散方程 du/dt=D(d^2 u/dx^2) + Cu 的数值解的代码,其中 u 是 x 和 t 的函数 - 我已经解决了数值并用 direchtlet 边界条件 u(-L/2,t)=u(L/2,t)=0 绘制它,临界长度是函数呈指数爆炸之前的值,我已经计算出是pi。我正在尝试将正确的边界条件更改为 Neumann 边界条件 u_x(L/2)=0 这应该会减少临界长度并导致函数呈指数增长,但我不太确定如何做到这一点我的似乎不太正常-有人可以看看他们是否可以确定我哪里出了问题吗?谢谢!
L=np.pi # value chosen for the critical length
s=101 # number of steps in x
t=10002 # number of timesteps
ds=L/(s-1) # step in x
dt=0.0001 # time step
D=1 # diffusion constant, set equal to 1
C=1 # creation rate of neutrons, set equal to 1
Alpha=(D*dt)/(ds*ds) # constant for diffusion term
Beta=C*dt # constant for u term
x = np.linspace(-L/2, 0, num=51)
x = np.concatenate([x, np.linspace(x[-1] - x[-2], L/2, num=50)]) # setting x in the specified interval
u=np.zeros(shape=(s,t))
u[50,0]=1/ds # delta function
for k in range(0,t-1):
u[0,k]=0 #direchtlet boundary condition
for i in range(1,s-1):
u[i,k+1]=(1+Beta-2*Alpha)*u[i,k]+Alpha*u[i+1,k]+Alpha*u[i-1,k] # numerical solution
u[s-1,k+1]=u[s-2,k+1] # neumann boundary condition
if k == 50 or k == 100 or k == 250 or k == 500 or k == 1000 or k == 10000: # plotting at times
plt.plot(x,u[:,k])
plt.show()
请您参考如下方法:
首先,您需要在时间循环开始时和当前时间步(而不是在 k+1 处应用左右边界条件正在做正确的 BC)。
import numpy as np
import matplotlib.pyplot as plt
L=np.pi # value chosen for the critical length
s=101 # number of steps in x
t=10002 # number of timesteps
ds=L/(s-1) # step in x
dt=0.0001 # time step
D=1 # diffusion constant, set equal to 1
C=1 # creation rate of neutrons, set equal to 1
Alpha=(D*dt)/(ds*ds) # constant for diffusion term
Beta=C*dt # constant for u term
x = np.linspace(-L/2, 0, num=51)
x = np.concatenate([x, np.linspace(x[-1] - x[-2], L/2, num=50)]) # setting x in the specified interval
u=np.zeros(shape=(s,t))
u[50,0]=1/ds # delta function
for k in range(0,t-1):
u[0,k] = 0 # left direchtlet boundary condition
u[s-1,k] = 0 # right dirichlet boundary condition
for i in range(1,s-1):
u[i,k+1]=(1+Beta-2*Alpha)*u[i,k]+Alpha*u[i+1,k]+Alpha*u[i-1,k] # numerical solution
if k == 50 or k == 100 or k == 250 or k == 500 or k == 1000 or k == 10000: # plotting at times
plt.plot(x,u[:,k])
plt.savefig('test1.png')
plt.close()
对于 dirichlet BC,你得到: (可能与以前相同,因为对于扩散问题,它不会产生太大影响,但无论如何都是不正确的)。然后你改变你的冯-诺依曼 BC 的右边界条件
u[s-1,k] = u[s-3,k] # right von-neumann boundary condition
因为我看到您使用的是中心差分方案,所以 Von-Neumann BC 声明边界处的 du/dx=0。在右边界用中心差分格式离散这个导数是(u[s-1,k]-u[s-3,k])/dx = 0,所以u[ s-1,k]=u[s-3,k]。通过此更改,您将获得
