这是我的代码:
phones = Customer.objects.filter(active=True).values('name')\
.annotate(count = Count('phone',filter=Q(phone__model__icontains=model_list[0]))
.annotate(count1 = Count('phone',filter=Q(phone__model__icontains=model_list[1]))
.annotate(count2 = Count('phone',filter=Q(phone__model__icontains=model_list[2]))
.annotate(count3 = Count('phone',filter=Q(phone__model__icontains=model_list[3]))
.annotate(count4 = Count('phone',filter=Q(phone__model__icontains=model_list[4]))
........
html
{% if phones %}
{% for phone in phones %}
<tr>
<td>{{ phone.name }}</td>
<td>{{ phone.count }}</td>
<td>{{ phone.count1 }}</td>
<td>{{ phone.count2 }}</td>
<td>{{ phone.count3 }}</td>
<td>{{ phone.count4 }}</td>
</tr>
{% endfor %}
{% enfif %}
我的 model_list 仍然有很多模型。我应该如何使用 for 循环来简化这些操作?
如果我的 model_list 有 100 个模型,这将非常复杂。
我已经试过了:
for i in range(len(model_list)):
phone= Customer.objects.filter(active=True).values('name')\
.annotate(count = Count('phone',filter=Q(phone__model__icontains=model_list[i]))
html
{% if phones %}
{% for phone in phones %}
<tr>
<td>{{ phone.name }}</td>
<td>{{ phone.count }}</td>
</tr>
{% endfor %}
{% endif %}
但是结果不是我想要的,因为我只得到了其中一个数据。 例如:model_list[0]
请您参考如下方法:
像这样查询计数:
phones = Customer.objects.filter(active=True).values('name')
for idx, model in enumerate(model_list):
counts = {'count%s' % idx : Count('phone',filter=Q(phone__model__icontains=model)}
phones = phones.annotate(**counts)
然后您需要将一系列模型传递给模板(比如在 models_idx_range 中作为上下文参数 models_idx_range=range(models_count))并迭代计数:
{% if phones %}
{% for phone in phones %}
<tr>
<td>{{ phone.name }}</td>
{% for idx in models_idx_range %}
<td>{{ getattr(phone, 'count%s' % idx) }}</td>
</tr>
{% endfor %}
{% endif %}
