Skip to main content
 首页 » 编程设计

python之树莓派到 AB controllogix : how to trigger output in GPIO based on continuosly reading plc tag value

2024年12月31日9lautakyan007

我在 GitHub 上发现了 pylogix,并一直在 AB L71 CPU 上玩读/写标签。我在读/写部分成功了,但我想做的是根据大于 0 的 plc 值触发 GPIO 引脚输出。

我似乎无法弄清楚我需要做什么才能将不断更新的值输入到输出函数中。

import threading 
from pylogix.eip import PLC 
from gpiozero import LED 
from time import sleep 
 
comm = PLC() 
comm.IPAddress = '10.201.191.177' 
 
def readdata(): 
    threading.Timer(1.0, readdata).start() 
    x = comm.Read('parts') 
    print (x) 
readdata() 
 
if x > 0: 
relay = LED(2) 

请您参考如下方法:

很高兴看到我不是这个论坛上唯一对 PLC 感兴趣的人。我可能会为您推荐这个:

编辑: 我阅读了您模块的文档。在下面试试这个新代码 可以找到文档 https://gpiozero.readthedocs.io/en/stable/

import threading # I don't think this is necessity for your application 
import time 
from pylogix.eip import PLC 
from gpiozero import LED 
from time import sleep 
 
with PLC() as comm #small edit here to control the closing of sockets upon exit 
    comm.IPAddress = '10.201.191.177' 
    running=True 
    relay = LED(2) #I believe the previous version of your code was constantly overwriting your 'relay' variable with a new instance of class LED 
    while running==True: 
        x=comm.read('parts') 
        if x > 0: 
            relay.on() 
        else: relay.off() 
    time.sleep(.5) 
#this will run forever updating your LED every 500ms, I would recommend writing code to exit this loop