Skip to main content
 首页 » 编程设计

python之Raspberry Pi 3 B+ BLE 升级后扫描失败(使用Stretch)

2024年12月31日8飞鱼

在执行 apt-get 更新/升级后,使用已知有效 Python 示例的 BLE 扫描在全新的 Raspberry Pi 3 B+(金属 jar CPU)上失败。要重新创建,请使用 NOOBS 2.8.2,设置 Pi 并执行 apt-get 更新和升级,接受所有建议的更改。然后使用 this sample code扫描 BLE 设备。作为诊断的一部分,命令:

hcitool lescan 

用于查看是否可以打开hci0设备。这导致了错误:

hcitool lescan Set scan parameters failed: Input/output error 

此解决方法成功解决了该错误:

hciconfig hci0 down 
hciconfig hci0 up 
hcitool lescan 

但只有在“hcitool lescan”开始成功运行之后。目前尚不清楚我们是否必须实际捕获白名单中的扫描设备才能使扫描成功(速度太快而无法捕获和停止)。

示例代码在这些新系统版本上失败:

ii  bluez                           5.43-2+rpt2+deb9u2           armhf        Bluetooth tools and daemons 
ii  bluez-firmware                  1.2-3+rpt6                   all          Firmware for Bluetooth devices 
ii  bluez-hcidump                   5.43-2+rpt2+deb9u2           armhf        Analyses Bluetooth HCI packets 
ii  libbluetooth-dev                5.43-2+rpt2+deb9u2           armhf        Development files for using the BlueZ Linux Bluetooth library 
ii  libbluetooth3:armhf             5.43-2+rpt2+deb9u2           armhf        Library to use the BlueZ Linux Bluetooth stack 
ii  pi-bluetooth                    0.1.8                        all          Raspberry Pi 3 bluetooth 
ii  python-bluez                    0.22-1                       armhf        Python wrappers around BlueZ for rapid bluetooth development 

但在这个系统上工作,一次升级回来:

ii  bluez                           5.43-2+rpt2+deb9u2           armhf        Bluetooth tools and daemons 
ii  bluez-firmware                  1.2-3+rpt5                   all          Firmware for Bluetooth devices 
ii  libbluetooth-dev                5.43-2+rpt2+deb9u2           armhf        Development files for using the BlueZ Linux Bluetooth library 
ii  libbluetooth3:armhf             5.43-2+rpt2+deb9u2           armhf        Library to use the BlueZ Linux Bluetooth stack 
ii  pi-bluetooth                    0.1.7                        all          Raspberry Pi 3 bluetooth 
ii  python-bluez                    0.22-1                       armhf        Python wrappers around BlueZ for rapid bluetooth development 

编辑:btmon 命令的输出(新的非工作单元):

Bluetooth monitor ver 5.43 
= Note: Linux version 4.14.52-v7+ (armv7l)                                                                                         0.695265 
= Note: Bluetooth subsystem version 2.22                                                                                           0.695276 
= New Index: B8:27:EB:A0:39:EC (Primary,UART,hci0)                                                                          [hci0] 0.695279 
= Open Index: B8:27:EB:A0:39:EC                                                                                             [hci0] 0.695281 
= Index Info: B8:27:EB:A0:39:EC (Broadcom Corporation)                                                                      [hci0] 0.695284 
@ RAW Open: python (privileged) version 2.22                                                                       {0x0003} [hci0] 0.695289 
@ RAW Open: hcitool (privileged) version 2.22                                                                      {0x0002} [hci0] 0.695291 
@ MGMT Open: bluetoothd (privileged) version 1.14                                                                         {0x0001} 0.695294 
@ MGMT Open: btmon (privileged) version 1.14                                                                              {0x0004} 0.695367 
> HCI Event: LE Meta Event (0x3e) plen 40                                                                                   [hci0] 2.692582 
      LE Advertising Report (0x02) 
        Num reports: 1 
        Event type: Scannable undirected - ADV_SCAN_IND (0x02) 
        Address type: Random (0x01) 
        Address: 51:46:AD:CA:4C:2F (Resolvable) 
        Data length: 28 
        16-bit Service UUIDs (complete): 1 entry 
          Google (0xfe9f) 
        Service Data (UUID 0xfe9f): 0000000000000000000000000000000000000000 
        RSSI: -84 dBm (0xac) 

来自年长的工作单位:

Bluetooth monitor ver 5.43 
= Note: Linux version 4.14.34-v7+ (armv7l)                                                                                         0.396738 
= Note: Bluetooth subsystem version 2.22                                                                                           0.396744 
= New Index: B8:27:EB:31:E6:62 (Primary,UART,hci0)                                                                          [hci0] 0.396746 
= Open Index: B8:27:EB:31:E6:62                                                                                             [hci0] 0.396748 
= Index Info: B8:27:EB:31:E6:62 (Broadcom Corporation)                                                                      [hci0] 0.396749 
@ RAW Open: python (privileged) version 2.22                                                                       {0x0002} [hci0] 0.396752 
@ MGMT Open: bluetoothd (privileged) version 1.14                                                                         {0x0001} 0.396753 
@ MGMT Open: btmon (privileged) version 1.14                                                                              {0x0003} 0.396800 
> HCI Event: LE Meta Event (0x3e) plen 42                                                                                   [hci0] 0.534168 
      LE Advertising Report (0x02) 
        Num reports: 1 
        Event type: Non connectable undirected - ADV_NONCONN_IND (0x03) 
        Address type: Public (0x00) 
        Address: 0C:F3:EE:B3:B8:53 (EM Microelectronic) 
        Data length: 30 
        Flags: 0x06 
          LE General Discoverable Mode 
          BR/EDR Not Supported 
        Company: Apple, Inc. (76) 
          Type: iBeacon (2) 
          UUID: a6ffa91b-91f4-f2ad-0f4a-6dcf5444232f 
          Version: 0.256 
          TX power: -76 dB 
        RSSI: -70 dBm (0xba) 

请您参考如下方法:

所以您的扫描似乎已经处于事件状态(因为它传送了一个广告数据包)? lescan 命令首先设置扫描参数,然后开始扫描。如果已经有正在进行的扫描,HCI 会禁止设置扫描参数命令。