我需要一些帮助来找到编写 Raspberry python 程序的最佳方法。
在这个程序中,我需要监控来自连接到树莓派的各种传感器的多个值,并通过 pyqt GUI 与这些值进行交互。 GUI 和传感器驱动程序必须完全分开。
为此,我考虑在 GUI 和传感器之间制作并使用“变量管理器”对象,作为“缓冲区”或类似的东西。通过使用线程和锁,传感器会不断更新变量管理器(在相应的驱动程序中使用 while 循环),而 GUI 会在我需要时查询某些值。
如果能够从 gui 向传感器发送一些命令也很好,但我不知道如何在此配置中执行此操作。
您认为这可以正常工作吗?有没有其他更有效/更适合这样做的方法?
非常感谢您!
请您参考如下方法:
我会这样做:
[物理传感器] --> [Python 传感器监视器] --> [PubNub/类似]
# Not tested, probably not good
from threading import Thread
from pubnub import PubNub
class SensorMonitor(threading.Thread):
def __init__(self):
self.pubnub = PubNub("demo", "demo")
self.switch = True
def _on_receive(self, sensor_data):
# can also do async() with a callback - https://www.pubnub.com/docs/python/data-streams-publish-and-subscribe
self.pubnub.publish().channel('raw_data').message(sensor_data).sync()
@staticmethod
def _poll_sensor(address):
data = get_sensor_data(address)
return data
def run(self):
while self.switch:
_data = poll_sensor('my_address')
self._on_receive(_data)
time.sleep(1)
def terminate(self):
self.switch = False
monitor = SensorMonitor()
monitor.start()
然后您的 GUI 可以使用 PubNub 消费者在流式传输和检查/执行操作时获取数据。你可以在这里使用 JS 或 Python!
