我刚刚将我在 Tkinter 中的布局从包移动到网格。这进展顺利。我在 Main 函数中错误地同时使用了 pack 和 grid。我修复它,而不仅仅是使用抓地力。但我意识到我仍在构建 Tkinter 小部件的类中使用 pack。这些都是标签。看起来这没问题并且有效,但我认为这不是一个值得遵循的好习惯。如果我在类中使用网格,那么它会在 Main 的网格中嵌入自己的网格吗?当在类中创建一些小部件而在 Main 中创建一些小部件时,布局屏幕的最佳方式是什么?
所以这是仍然在里面的类....
class StopWatch(Frame):
...
def makeWidgets(self):
""" Make the time labels. """
la = Label(self, textvariable=self.timestr)
la.pack(fill=X, expand=NO, pady=2, padx=2)
lb = Label(self, textvariable=self.timestr)
lb.pack(fill=X, expand=NO, pady=2, padx=2)
lc = Label(self, textvariable=self.timestr)
lc.pack(fill=X, expand=NO, pady=2, padx=2)
ld = Label(self, textvariable=self.timestr)
ld.pack(fill=X, expand=NO, pady=2, padx=2)
lsplita = Label(self, textvariable=self.lapastr)
lsplita.pack(fill=X, expand=NO, pady=2, padx=2)
lsplitb = Label(self, textvariable=self.lapbstr)
lsplitb.pack(fill=X, expand=NO, pady=2, padx=2)
lsplitc = Label(self, textvariable=self.lapcstr)
lsplitc.pack(fill=X, expand=NO, pady=2, padx=2)
lsplitd = Label(self, textvariable=self.lapdstr)
lsplitd.pack(fill=X, expand=NO, pady=2, padx=2)
self._setTime(self._elapsedtime)
现在这是我的 Main 网格....
def main():
root = Tk()
root.geometry("500x400")
sw1 = StopWatch(root)
sw1.grid(row=0, column=5, rowspan=2)
b1 = Button(root, text='Start', command=sw1.Start)
b2 = Button(root, text='Stop', command=sw1.Stop)
b3 = Button(root, text='Reset', command=sw1.Reset)
b4 = Button(root, text='Quit', command=root.quit)
b5 = Button(root, text='Get Split A', command=sw1.Getsplita)
b6 = Button(root, text='Get Split B', command=sw1.Getsplitb)
b7 = Button(root, text='Get Split C', command=sw1.Getsplitc)
b8 = Button(root, text='Get Split D', command=sw1.Getsplitd)
b1.grid(row=0, column=0)
b2.grid(row=0, column=1)
b3.grid(row=0, column=2)
b4.grid(row=0, column=3)
b5.grid(row=1, column=0)
b6.grid(row=1, column=1)
b7.grid(row=1, column=2)
b8.grid(row=1, column=3)
root.mainloop()
请您参考如下方法:
最佳做法是在应用程序中同时grid 和pack。
唯一需要注意的是,您不能在给定的框架内混合使用它们。框架中小部件的几何管理器(grid、pack、place)的选择完全独立于任何其他框架中使用的几何管理器.每个都有长处和短处,您应该相应地使用它们。
另外——我经常看到这个错误——从小部件继承的类应该不调用grid或pack或 place 自身。
例如,这是不正确:
class Example(tk.Frame):
def __init__(self, parent):
...
self.pack(...)
class Main(tk.Frame):
def __init__(self, parent):
...
this.example = Example(self)
代替上面的,pack应该从Example中移除,并且Main应该重新定义来调用pack(或 grid 或 place):
class Main(tk.Frame):
def __init__(self, parent):
...
this.example = Example(self)
this.example.pack(...)
第一个(不正确的)示例的问题是,如果您在 main 中有十几个框架以及一些其他小部件,如果您决定从 pack 切换到 grid,你将不得不修改其他十几个类。通过让父级负责安排自己的子级,当您更改布局时,您只需更改一个功能。
