Skip to main content
 首页 » 编程设计

python之每次试验的 psychopy 重置变量

2024年10月24日12leader

我制作了自己的评分量表,这是一个从 0 到 28:18 的时间轴。它根据人们在每次试验中按下“t”或“b”键的速度而移动。屏幕上出现的内容如下所示:

我希望每次试验时顶部的时间都重置为 14:09。每次试验后有 0.5 秒的试验间隔,在此期间屏幕上会显示“+”。我遇到的问题是,如果您在 ITI 期间按“t”或“b”,下一次审判将不会在 14:09 开始。相反,它会按“t”或“b”键移动时间线的方向移动。这是我尝试纠正此问题的当前代码:

prevPos = 0 
trialNum=0 
b_list=[] 
t_list=[] 
key=[] 
 
# loop through pictures 
for eachPic in catPictures: 
    b_list=[] 
    t_list=[] 
    timer = core.CountdownTimer(TrialDuration) 
    while timer.getTime() > 0: 
        for key in event.getKeys(): 
            if key in ['escape']: 
                core.quit() # quit if they press escape 
            if key in ['b']: 
                # add keypress to list for each keypress. then move cursor proportionally to length of this list 
                b_list.append(key) 
                prevPos+=len(b_list) 
            if key in ['t']: 
                t_list.append(key) 
                prevPos-=len(t_list) 
 
    # set upper and lower limits to where cursor can go (which will later be halved to restrict range of cursor on the screen) 
        if prevPos <= -849: 
            prevPos = -849 
        elif prevPos >=849: 
            prevPos = 849 
        # make absolute position so pos_absolute becomes a range from 0 to 300 (based on 28:18 min movie) 
        pos_absolute = prevPos + 849 
        # need to have range of 1698 (# of seconds in 28:18) 
        # need to have range of 1698 (# of seconds in 28:18) 
        # current range is 0 to 849 (which is 50% of 1698) 
        seconds =  pos_absolute 
 
        Image2 = visual.ImageStim(window) 
        #curbImage2.setSize = ((0.5,0.5), units = 'norm') 
        # make a little higher than the absolute middle 
        Image2.setPos([0,100]) 
        # use each image (i in curbImages) 
        Image2.setImage(catPictures[trialNum]) 
 
        # define cursor that moves along timeline 
        cursorImage = visual.ImageStim(window) 
        cursorImage.setImage(directoryStim+'cursor.png') 
        # make cursor move by however big prevPos is 
        cursorImage.setPos([int(prevPos)*.5,int(400)]) 
        # make the line 
        timeline = visual.SimpleImageStim(win=window, image=directoryStim+'line.png', units='pix', pos=[0, 400]) 
    event.clearEvents() # get rid of other, unprocessed events 
 
        # print min and max values next to timeline 
        min = visual.TextStim(window, '0:00', color='Black', pos=[-500, 400]) 
        max = visual.TextStim(window, '28:18', color='Black', pos=[500, 400]) 
        # print constantly updating time value 
        timeText = visual.TextStim(window,'%d:%02d' % (seconds/60, seconds % 60),color='Black',wrapWidth=1080,font='Verdana', pos=[0,465], height=50) 
 
        ## now put everything on the screen 
        Image2.draw(window) 
        min.draw(window) 
        max.draw(window) 
        timeText.draw(window) 
        timeline.draw(window) 
        cursorImage.draw(window) 
    ## flip so it actually appears 
        window.flip() 
 
    ITI = visual.TextStim(window, '+', pos=[0,0], height=50, color='Black') 
    ITI.draw(window) 
    window.flip() 
    core.wait(.5,.5) 
    trialNum+=1 
    prevPos = 0 
    b_list =[] 
    t_list=[] 
    key=[]  

如何在每次试验开始时将我的时间线重置为 14:09(又名 prevPos = 0),即使人们在试验结束时按“t”或“b”或在试验间隔期间?

请您参考如下方法:

  1. 在内部 for 循环下缩进内容。
  2. 将您的 event.clearEvents() 移动到您的 while 循环之前 或者在 core.wait 之后。这就是您开始收听新内容的地方 按键。在等待期间按下将返回 在下一个周期调用 event.getKeys() while 循环。这就是它立即移动光标的原因。没有 拥有 event.clearEvents() 的真正原因 因为您只监听 while 循环中的事件。这就是为什么我 建议您移动它而不是插入一个新的。
  3. 启动心理刺激非常耗费资源 有时可能需要几百毫秒。没有 创建几个新的 ImageStims 和 TextStims 的原因 每次试验。
  4. pos_absolute 和 seconds 是多余的。您只需秒即可完成。
  5. 一个风格的东西:而不是stim.setPos(x),你现在可以为所有其他属性做stim.pos = x等等。这是从现在开始设置刺激属性的首选方式(更简洁的代码并允许对属性进行更多操作)。

这是经过上述更改后的清理代码:

# Stimuli 
Image2 = visual.ImageStim(window) 
cursorImage = visual.ImageStim(window) 
min = visual.TextStim(window, '0:00', color='Black', pos=[-500, 400]) 
max = visual.TextStim(window, '28:18', color='Black', pos=[500, 400]) 
timeText = visual.TextStim(window,color='Black',wrapWidth=1080,font='Verdana', pos=[0,465], height=50) 
ITI = visual.TextStim(window, '+', pos=[0,0], height=50, color='Black') 
timeline = visual.SimpleImageStim(win=window, image=directoryStim+'line.png', units='pix', pos=[0, 400]) 
timer = core.CountdownTimer(TrialDuration) 
 
# loop through pictures 
trialNum=0 
for eachPic in catPictures: 
    prevPos = 0 
    key=[] 
    b_list=[] 
    t_list=[] 
    timer.reset() 
    event.clearEvents() # get rid of other, unprocessed events 
    while timer.getTime() > 0: 
        for key in event.getKeys(): 
            if key in ['escape']: 
                core.quit() # quit if they press escape 
            if key in ['b']: 
                # add keypress to list for each keypress. then move cursor proportionally to length of this list 
                b_list.append(key) 
                prevPos+=len(b_list) 
            if key in ['t']: 
                t_list.append(key) 
                prevPos-=len(t_list) 
 
        # set upper and lower limits to where cursor can go (which will later be halved to restrict range of cursor on the screen) 
        if prevPos <= -849: 
            prevPos = -849 
        elif prevPos >=849: 
            prevPos = 849 
        # make absolute position so pos_absolute becomes a range from 0 to 300 (based on 28:18 min movie) 
        # need to have range of 1698 (# of seconds in 28:18) 
        # need to have range of 1698 (# of seconds in 28:18) 
        # current range is 0 to 849 (which is 50% of 1698) 
        seconds =  prevPos + 849 
 
        #curbImage2.size = ((0.5,0.5), units = 'norm') 
        # make a little higher than the absolute middle 
        Image2.pos = [0,100] 
        # use each image (i in curbImages) 
        Image2.image = catPictures[trialNum] 
 
        # define cursor that moves along timeline 
        cursorImage.image = directoryStim+'cursor.png' 
        # make cursor move by however big prevPos is 
        cursorImage.pos = [int(prevPos)*.5,int(400)] 
        timeText.text = '%d:%02d' % (seconds/60, seconds % 60)) 
 
        ## now put everything on the screen 
        Image2.draw(window) 
        min.draw(window) 
        max.draw(window) 
        timeText.draw(window) 
        timeline.draw(window) 
        cursorImage.draw(window) 
        ## flip so it actually appears 
        window.flip() 
 
    ITI.draw(window) 
    window.flip() 
    core.wait(.5,.5) 
    trialNum+=1 

请注意,我还删除了一些看似不必要的 b_list、key 等重置