由于 tf.max_pool 不支持可变大小,所以 spp 层不起作用。 我将长度输入图表,但出现错误。
length = tf.placeholder(tf.int32)
shape=[-1, length,length,32]
pool = tf.nn.max_pool(output,
ksize=[1, np.ceil(shape[1] * 1. / l).astype(np.int32), np.ceil(shape[2] * 1. / l).astype(np.int32), 1],
strides=[1, np.floor(shape[1] * 1. / l + 1).astype(np.int32), np.floor(shape[2] * 1. / l + 1), 1],
padding='SAME')
TypeError:应为 int32,得到的是“float”类型的 1.0。
你有什么想法,如何处理它吗?
请您参考如下方法:
在您的步幅参数中,将第三个值更改为整数。 即
np.floor(shape[2] * 1./l + 1) 到 np.floor(shape[2] * 1./l + 1).astype(np .int32)
完整的stride选项:
strides=[1, np.floor(shape[1] * 1. / l + 1).astype(np.int32),
np.floor(shape[2] * 1. / l + 1).astype(np.int32), 1],
希望对你有帮助。
